Tubular preheater_Hanlong Machinery

Non-standard customization
Weight（Specific to actual production）
2-10t/h
Production capacity
Equipped with power
6500×460×1100mm
Dimensions（Specific to actual production）

Tubular preheater
Tubular preheater
Tubular preheater
Tubular preheater
Tubular preheater
Tubular preheater

king@hlmachines.com

Product video

Product parameter

Model	Production capacityt/h	Steam pressure MPa	Discharge temperature℃	Dimensions mm
YR-2	2	0.08-0.096	60-85	1500×460×1100
YR-4	4	0.08-0.096	60-85	2500×460×1100
YR-6	6	0.08-0.096	60-85	3500×460×1100
YR-8	8	0.08-0.096	60-85	4500×460×1100
YR-10	10	0.08-0.096	60-85	6500×460×1100

Product details

This machine uses steam heating to increase the temperature of the liquid to soften and kill enzymes. It is suitable for preheating fluid and semi-fluid materials.

1. Overview
The function of Tubular preheater is steam heating to increase the temperature of the slurry and achieve the purpose of softening and killing enzymes. It is suitable for preheating fluid and semi-fluid materials.
2, Structure and principle

Tubular preheater is composed of five groups of six φ25×2 tube bundles and shells. The material passes through the tube, two groups enter, two groups return, and one group exits for three-pass flow. The steam enters the space in front of the shell and the outer wall of the pipe through the pressure reducing valve, the shut-off valve, the safety valve and the pipe to complete the heat exchange, thereby increasing the temperature of the slurry and achieving the purpose of preheating. The steam trap part is used to remove the condensed water during the heat exchange process. This machine can design the outer interlayer heat preservation according to user requirements.

3, Operation and use
1. Tighten all bolts on the whole machine.
2. Check whether the connecting parts are reliably sealed, open the front and rear covers, wash the debris with hot water, and close the front and rear covers after cleaning.
3. Open the steam valve to enter the steam, adjust the pressure reducing valve, and after the pressure is controlled within 0.1MPa, slowly open the stop valve and the steam release valve, and close the steam release valve when steam is emitted from the steam release valve. Turn on the feed pump to transport the material, and increase the steam pressure at the same time, depending on the change of the temperature indicated by the thermometer. Due to the difference of the feed temperature, the relationship between the steam pressure and the discharge temperature and speed should be grasped during actual operation. When the temperature reaches the specified requirements, the material can be discharged normally.
4. After stopping the feed, first close the steam valve to stop the steam intake. After the standby device is completely cooled down, close the shut-off valve and open the steam release valve , After confirming that there is no pressure in the machine, close the steam release valve.
5. After each shift, clean the inner wall of the machine with hot water.

4, Matters needing attention
1. The steam pressure must be controlled within the specified range. Pressure reducing valves, safety valves, traps, pressure gauges, and thermometers must be Relevant required periodic verification.
2. Let off all remaining steam when shutting down to keep the inside and outside of the machine clean.
3. Before each use of the machine, open the steam release valve to drain the condensed water in the steam layer to prevent affecting the operation of the trap.

Years of focus fruit and vegetable processingProvide solution design, equipment selection, one-stop service

Tubular preheater

Customized Product Type:Tubular preheater